30.10.2019
Research projects
Effects of pre-hydration on the performance of cements and the influence of different clinker properties
The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.
Learn more
01.05.2021
Research projects
Calcined Clays from mineral secondary raw materials
The aim of the research project is to investigate the suitability of previously largely unused mineral secondary raw materials from the stone and earth industry as a resource-conserving and climate-friendly main cement constituent. The use of cal-cined clays from secondary raw materials instead of conventional main cement constituents or high-quality primary clays can make an important contribution to the production of climate-friendly and resource-efficient cements.
Learn more
01.10.2020
Research projects
Interactions of accelerating admixtures and clinker-efficient cements with several main constituents to improve the early compressive strength of concrete
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason for this is that early strength is not high enough for economical production processes and also competitive construction with concrete. Accelerating admixtures can improve the early strength of concrete. The research project investigates interactions between concrete admixtures that accelerate the strength development and cements with several main constituents.
Learn more
01.07.2021
Research projects
Clinker burning with alternative fuels at low process temperatures - effects on coating formation and on the corrosion of refractory products in the cement rotary kiln as well as on the performance of cement
The replacement of primary fuels by alternative fuels is of great economic and ecological importance for the cement industry and is to be increased in the future. The fuel ashes are used as raw material in the cement clinker and influence its properties as well as the coating formation on the refractory lining in the kiln. Exact knowledge of these effects is indispensable for the further increase of the alternative fuel rate and the simultaneous optimisation of the kiln operation as well as for the maintenance of the clinker quality and the service life of the refractory lining.
Learn more
01.08.2020
Research projects
Influences of two-stage mixing on the hydration behaviour of Portland-composite cements and composite cements as well as on the concrete performance
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason is that the early strength is not high enough for economical production processes and competitive construction with concrete. The research project is investigating the extent to which more intensive mixing and further cement constituents besides clinker increase the mixing energy input and can increase the early cement hydration and thus the strength development.
Learn more
01.04.2021
Research projects
Use of X-ray fluorescence analysis to determine trace element contents in cements
The aim of the research project is to develop a procedure for analysing trace elements on cements using X-ray fluorescence analysis. In addition, precision data and application limits are to be determined, which are essential in order to be able to classify the results.
Learn more
01.11.2019
Research projects
Effects of pre-hydration on the performance of cements and the influence of different clinker properties
The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.
Learn more
01.10.2020
Research projects
Resource-efficient use of sulphate-containing process dusts for sulphate optimisation using isothermal heat flow calorimetry
The research project analysed whether sulphate-rich process dusts can be used to optimise the sulphate content of cements, thereby saving anhydrite/gypsum and, in particular, improving the early strength of cements with several main constituents. Furthermore, it was to be determined whether isothermal heat flow calorimetry can be used as a fast and cost-effective investigation method for this purpose.
Learn more
01.01.2020
Research projects
Performance of ternary cements with Portland cement clinker, granulated blast furnace slag and calcined clay as the main constituents
The aim of the research project is the detailed investigation of the performance, durability and hydration behaviour of ternary cements with blastfurnace slag and calcined clay as main constituents (KSQ cements).
Learn more
01.02.2019
Research projects
Optimisation of the X-ray analysis of dusts from clinker production as a basis for their utilisation and process control
The aim of the research project was to define the procedure for robust and precise dust analyses in factory laboratories in order to enable optimal utilisation of production dusts and to support process control.
Learn more
