Loading
filterfilterClose entries
filterfilterFilter entries

Knowledge transfer


Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Learn more

Completed

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Learn more

Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Learn more

Cement production


Current

AC²OCem - Accelerating Carbon Capture using Oxyfuel Technology in Cement Production

The project investigates the existing 1st generation oxyfuel technology and an innovative 2nd generation oxyfuel concept with the ultimate goal of reducing CO₂ avoidance cost, increasing plant efficiency and strengthening the overall competitiveness.

Learn more

Current

CLEANKER – Integrated calcium looping process for CO₂ capture

The aim of the CLEANKER (CLEAN clinKER) project is to perform large-scale testing of this technology as an integrated method (Technology Readiness Level 7). It is planned to treat 4 000 m³/h exhaust gas in a demonstration plant to be connected to an existing kiln line at the Buzzi Unicem works in Vernasca in Italy.

Learn more

Current

Optimisation of clinker-efficient cements by means of multimodal particle size distributions using energy-efficient products from separate ultra-fine grinding

Separate ultra-fine grinding of cement - Energy-efficient grinding meets optimised cement and concrete properties. Today, future-oriented cements can already be produced more sustainably and efficiently by using various components of different finenesses.

Learn more

Current

Method for rapid testing of the quality of flyable alternative fuels for use in the clinker burning process

As part of the research project, the German cement industry is to be provided with a utility model of a new type of apparatus for quasi-continuous incoming inspection of SRF deliveries. Based on a fast, technically robust and efficient characterisation of flight capability, humidity and optically detectable features of SRF, a system shall be developed, constructed and tested in practice.

Learn more

Current

Cement sieving - Use of high-speed sieving machines to increase energy efficiency in cement grinding through optimised cement classification

The IGF project 22022 N aims to evaluate the performance of high-speed sieving machines to increase energy efficiency in cement grinding circuits through optimised cement classification. The central elements here are the energy and qualitative product comparison of sieving and classifying.

Learn more

Current

Automised Classification and Assessment of Alternative Fuels

The aim of the project is to investigate Machine Learning models for the characterisation of alternative fuels in the cement production. For this purpose, a public-accessible database (with fuel characteristics and images) is set-up and different machine learning models will be trained on that data, the algorithms will be tested on their robustness and suggestions for the classification of the fuel quality and its visualisation in the control room will be made.

Learn more

Concrete technology


Current

Performance of two-layer concrete pavers using clinker efficient cements with focus on freeze-thaw resistance

Following the recommendations of the CO₂ roadmap, a minimum of 50 % of concrete for pavers will be produced with CEM II/C or similar clinker efficient cements by 2050. Proof of their practicability for production of two-layer pavers is still pending. This research project aims to develop actions for paver manufacturers to ensure a production of concrete pavers with a high resistance to freeze-thaw attack with de-icing chemicals using clinker efficient cements.

Learn more

Current

Fire performance of ecologically optimised concretes

The purpose of the research project is to gain the first systematic scientific findings on spalling behaviour in the event of fire and on thermo-mechanical and thermo-physical properties for concretes with the new clinker-efficient cement types and with recycled aggregates.

Learn more

Current

REDOL - Aragon's REgional Hub for circularity: Demonstration Of Local industrial-urban symbiosis initiatives

Redol deals with closing material cycles using the city of Zaragoza as an example. The research project focuses on solid urban waste, which is an abundant source to produce circular products. Five value chains for solid urban waste in the Aragon region will be redesigned in order to be able to produce circular products using an industrial-urban symbiosis approach.

Learn more

Current

Fresh concrete properties and hardening behaviour of concretes with clinker-efficient cements CEM II/C and CEM VI

EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a widespread application, it is important that all parties involved develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for application of these cements in concrete for the construction industry.

Learn more

Current

Durability of concretes with clinker-efficient cements CEM II/C and CEM VI

EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a wide application, all parties involved have to develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for the application of these cements in the construction industry.

Learn more

Completed

Properties of finely dispersed materials from the recycling of mineral construction waste and their use in cement - effects on water absorption, hydration and pore structure


Chemistry and mineralogy


Current

Effects of pre-hydration on the performance of cements and the influence of different clinker properties

The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.

Learn more

Current

Process atmosphere during clay calcination – effects on emissions and product properties

Calcined clays as the main cement constituent are an essential part of the cement industry's decarbonisation strategy. Many clay deposits have iron-rich impurities that form hematite during calcination, which colors the product, the cement and ultimately the concrete red. A reducing atmosphere during calcination and/or cooling can prevent the formation of hematite. Systematic findings on the influence of secondary constituents in clays on their reactivity, emissions and cement-technical properties have hardly been available to date and are to be systematically investigated in the project.

Learn more

Current

Calcined Clays from mineral secondary raw materials

The aim of the research project was to investigate the suitability of largely unutilised mineral secondary raw materials from the stone and earth industry as a resource-conserving and climate-friendly main cement constituent. The utilisation of calcined clays from secondary raw materials instead of conventional cement main constituents or high-quality primary clays can make an important contribution to the production of climate-friendly and resource-efficient cements. This means that the transformation process of the cement industry can be shaped in a way that is not only cli-mate-friendly but also resource-efficient.

Learn more

Current

Performance of ternary cements with Portland cement clinker, calcined clay and limestone as the main constituents

The project systematically investigates the performance and hydration behaviour of ternary cement (KQL) with clinker (K), calcined clay (Q) and limestone (L) as well as key durability aspects of concretes produced with these materials.

Learn more

Current

High-quality recycling of crushed concrete sand

In the ZIM research project, used concrete is processed in such a way as to improve the usability of all fractions generated, in particular the crushed sand and the fine fraction. To this end, tests are also being carried out on the pozzolanic reactivation of the recycled concrete fines.

Learn more

Current

Clinker burning with alternative fuels at low process temperatures - effects on coating formation and on the corrosion of refractory products in the cement rotary kiln as well as on the performance of cement

The replacement of primary fuels by alternative fuels is of great economic and ecological importance for the cement industry and is to be increased in the future. The fuel ashes are used as raw material in the cement clinker and influence its properties as well as the coating formation on the refractory lining in the kiln. Exact knowledge of these effects is indispensable for the further increase of the alternative fuel rate and the simultaneous optimisation of the kiln operation as well as for the maintenance of the clinker quality and the service life of the refractory lining.

Learn more

Environmental protection


Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Narrow down your search here.

Areas

  • Publications
  • Research projects
  • Training
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading