Loading
filterfilterClose entries
filterfilterFilter entries

Research projects

Knowledge transfer


Current

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Find out more

Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Find out more

Cement production


Current

AC²OCem - Accelerating Carbon Capture using Oxyfuel Technology in Cement Production

The project investigates the existing 1st generation oxyfuel technology and an innovative 2nd generation oxyfuel concept with the ultimate goal of reducing CO₂ avoidance cost, increasing plant efficiency and strengthening the overall competitiveness.

Find out more

Current

CLEANKER – Integrated calcium looping process for CO₂ capture

The aim of the CLEANKER (CLEAN clinKER) project is to perform large-scale testing of this technology as an integrated method (Technology Readiness Level 7). It is planned to treat 4 000 m³/h exhaust gas in a demonstration plant to be connected to an existing kiln line at the Buzzi Unicem works in Vernasca in Italy.

Find out more

Current

Optimisation and evaluation of process chains for chemical CO₂ utilisation for the emission reduction in the cement industry

To meet the ambitious climate protection targets by 2050, so-called CCUS technologies are required. In addition to CO₂ storage, the combination of CO₂ and hydrogen management offers the possibility of producing usable products. The combination of capture methods and methods of CO₂ utilisation results in a variety of possible process chains, the optimum of which depends on site-specific boundary conditions. The project analyses possible pathways in order to develop a supporting tool for strategy development for specific sites.

Find out more

Current

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Find out more

Current

Cement clinker production with simultaneous power generation

The core concept of the research project is to generate the maximum amount of electrical energy from the process exhaust gas during the production of cement clinker without affecting its kiln capacity or clinker quality. The electricity generated should cover the base load requirements for the cement production.

Find out more

Current

Method for rapid testing of the quality of flyable alternative fuels for use in the clinker burning process

As part of the research project, the German cement industry is to be provided with a utility model of a new type of apparatus for quasi-continuous incoming inspection of SRF deliveries. Based on a fast, technically robust and efficient characterization of flight capability, humidity and optically detectable features of SRF, a system shall be developed, constructed and tested in practice.

Find out more

Concrete technology


Current

Durability of concrete according to the performance principle - classification of material resistance, production control (PC), conformity criteria and control (CC)

In this project, the systematic classification of the carbonation and chloride penetration resistance of concretes will be investigated. Based on these results, recommendations for action will be derived for production and conformity control within the framework of a performance-based durability concept.

Find out more

Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Find out more

Current

Recycled clay brick containing materials as a raw material in resource efficient cements and durable concretes

The topic of the research project is the utilisation of brick-containing materials from the recycling of mineral construction waste. It is being investigated whether and how resource-efficient cements can be produced with processed brick-containing construction waste and reduced clinker content, thus reducing process-related CO₂ emissions.

Find out more

Current

LeptoCalc

The use of fines from concrete recycling plants as cement constituents is currently insufficiently investigated and requires further research. The basic prerequisite for the utilisation of the fines will be to be able to characterise the material properties as quickly and comprehensively as possible and to ensure a constant material flow. An essential part of the research project is therefore the development of a rapid test method with which the properties of these fines can be estimated, among other things, by measuring the residual reactivity.

Find out more

Current

Influence of releasable alkalis from aggregates on a deleterious alkali-silica reaction in concrete

The IGF project 21386 N focuses on the relationship between the releasable alkali contents from aggregates and possible effects in concrete.

Find out more

Current

Environmentally friendly railway sleepers with calcium sulfoaluminate cements

The research project will investigate whether the technical requirements for railway sleepers with CSA cements can be realised. Also, some basic links to standards (e.g. modulus of elasticity, creep and shrinkage in accordance with EC2) must be checked and ensured.

Find out more

Chemistry and mineralogy


Completed

Investigations on the internal particle size distribution of main constituents of Portland composite and composite cements

A laboratory method and a method on the internal particle size distribution that can be used on-site in a cement plant were developed in this research project.

Find out more

Completed

High-performance clinker for blastfurnace cements

Aim of the project was to improve the early strength performance of blastfurnace cements by a systematic adjustment of the clinker phase composition and/or addition of mineralisers in the clinker production process.

Find out more

Completed

Interactions between superplasticizers and cements with calcined clay in dependence of the temperature

The aim of the research project was to determine interactions between superplasticizers and cements with calcined clay.

Find out more

Completed

Suitability of various inorganic substances for use as a minor constituents in cements according to EN 197-1

The main scope of this research project was to supply evidence that selected inorganic substances are suitable for the use as minor constituents.

Find out more

Completed

Use of quantitative X-ray diffraction analysis in cement quality control

The research project initially involved a sequence of steps to formulate robust, automated preparation methods and evaluation files and determine their reproducibility.

Find out more

Completed

Investigations on the suitability of dolomitic carbonate rocks as cement main constituent

The aim of the research project was to investigate the suitability or usefulness of dolomitic carbonate rocks as a main cement constituent and to define requirements for dolomitic carbonate rocks as required for the production of high-performance dolomitic cements and concretes of high durability.

Find out more

Narrow down your search here.

Areas

  • All
  • Publications
  • Research projects
  • Trainings
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading