Die Verwendbarkeit der hydraulischen Bindemittel im Kalibergbau
Rasche Feststellung der Zerrieselungsfähigkeit von Hochofenschlacke
Durability of concretes with clinker efficient cements under modified concrete technological conditions
The current research project aims to determine if CEM II/C-cements can be used in some exposure classes (XC1-4, XF1) according to DIN 1045 2 under modified technological conditions of the concrete (reduced water-cement ratio, increased minimum strength class) without additional requirements.
Raw meal screening: Energy-optimised fine-rod screening of raw cement meal for the evaluation of process-relevant characteristic values
The subject of the research project is the fine-tuning of dry cement raw materials. The focus is on the influence on the electrical energy requirement during the comminution of the raw material and the thermal effects on the subsequent clinker burning process, caused by a changed raw meal granulometry.
Influence of releasable alkalis from aggregates on a deleterious alkali-silica reaction in concrete
Process Technology of Cement Production (Online Course)
This online course consists of two modules: "Grinding Technology and Raw Material Preparation" (Module 1) as well as "Clinker Production and Material Technology" (Module 2). Each module has a duration of one week. The course gives a deep insight into cement production technology, covering topics from quarry operation to cement grinding.
Firing Alternative Fuels: Opportunities, impacts on process, optimisation and limitations (Training course 1)
VDZ offers an online course that covers all the relevant aspects concerning the use of alternative fuels in cement plants. Starting with the main political drivers such as the circular economy and the European waste fuel strategy, the training will give a detailed view of the current state-of-the-art-situation with regard to the use of alternative fuels in the EU. In this context, pre-treatment and suitable quality control of alternative fuels will be also explained and presented. A main focus will be given to the drivers and barriers of the use of alternative fuels within the burning process. Relevant aspects will be explained and discussed with the participants. Finally, technical feasibilities, case studies and possible optimisation potential will be part of the training course. This training course provides four half-day training sessions in a webinar format. This unique format enables the employees to combine an adequate learning pace with their daily work in the plant.
Online Crash Course for Young Engineers
The cement industry provides excellent job opportunities for young engineers or scientists. Training schemes introduce these new employees to cement technology, taking their different professional backgrounds into account. This online course provides a one-week in-depth training session which covers all relevant aspects of cement technology including chemistry, mineralogy and environmental aspects. Quality control as well as cement performance in mortar and concrete will also be covered.
International­ VDZ Congress 2018
Climate protection and digitisation are key challenges for the cement industry: More than 600 representatives from the international cement industry and associated suppliers, as well as from scientific and research institutes around the world, gathered at the International VDZ Congress 2018 in Duesseldorf at the end of September. Steeped in tradition, the VDZ Congress is one of the world's most important events in the industry. The 40 talks held at this year's congress focused on particularly pressing topics such as climate protection and digitisation. The participants also discussed current technical challenges and the general situation with regard to cement production. A further highlight was an evening ceremony at which the winners of the VDZ Industrial Safety Prize 2017 received their awards.