Loading
filterfilterClose entries
filterfilterFilter entries

Knowledge transfer


Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Learn more

Completed

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Learn more

Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Learn more

Cement production


Current

AC²OCem - Accelerating Carbon Capture using Oxyfuel Technology in Cement Production

The project investigates the existing 1st generation oxyfuel technology and an innovative 2nd generation oxyfuel concept with the ultimate goal of reducing CO₂ avoidance cost, increasing plant efficiency and strengthening the overall competitiveness.

Learn more

Current

CLEANKER – Integrated calcium looping process for CO₂ capture

The aim of the CLEANKER (CLEAN clinKER) project is to perform large-scale testing of this technology as an integrated method (Technology Readiness Level 7). It is planned to treat 4 000 m³/h exhaust gas in a demonstration plant to be connected to an existing kiln line at the Buzzi Unicem works in Vernasca in Italy.

Learn more

Current

Optimisation of clinker-efficient cements by means of multimodal particle size distributions using energy-efficient products from separate ultra-fine grinding

Separate ultra-fine grinding of cement - Energy-efficient grinding meets optimised cement and concrete properties. Today, future-oriented cements can already be produced more sustainably and efficiently by using various components of different finenesses.

Learn more

Current

Method for rapid testing of the quality of flyable alternative fuels for use in the clinker burning process

As part of the research project, the German cement industry is to be provided with a utility model of a new type of apparatus for quasi-continuous incoming inspection of SRF deliveries. Based on a fast, technically robust and efficient characterisation of flight capability, humidity and optically detectable features of SRF, a system shall be developed, constructed and tested in practice.

Learn more

Current

Cement sieving - Use of high-speed sieving machines to increase energy efficiency in cement grinding through optimised cement classification

The IGF project 22022 N aims to evaluate the performance of high-speed sieving machines to increase energy efficiency in cement grinding circuits through optimised cement classification. The central elements here are the energy and qualitative product comparison of sieving and classifying.

Learn more

Current

Automised Classification and Assessment of Alternative Fuels

The aim of the project is to investigate Machine Learning models for the characterisation of alternative fuels in the cement production. For this purpose, a public-accessible database (with fuel characteristics and images) is set-up and different machine learning models will be trained on that data, the algorithms will be tested on their robustness and suggestions for the classification of the fuel quality and its visualisation in the control room will be made.

Learn more

Concrete technology


Current

Durability of concretes with clinker efficient cements under modified concrete technological conditions

The current research project aims to determine if CEM II/C-cements can be used in some exposure classes (XC1-4, XF1) according to DIN 1045 2 under modified technological conditions of the concrete (reduced water-cement ratio, increased minimum strength class) without additional requirements.

Learn more

Current

Proof for durability of chemically stressed concretes and concrete components: Proof of concrete attacked by carbonic acid

In order to be able to use new, clinker-efficient cements and concretes in the future even under the attack of carbonic acid, the development of a test and assessment concept is necessary. Therefore, VDZ and the Institute for Building Research of the RWTH Aachen started a joint research project.

Learn more

Current

Testing the freeze-thaw resistance with de-icing agents of concrete for exposure class XF2

The aim of the research project is to develop a practical method for testing the freeze-thaw resistance of XF2 concretes.

Learn more

Current

Environmentally friendly railway sleepers with calcium sulfoaluminate cements

The research project will investigate whether the technical requirements for railway sleepers with CSA cements can be realised. Also, some basic links to standards (e.g. modulus of elasticity, creep and shrinkage in accordance with EC2) must be checked and ensured.

Learn more

Current

URBCON

The objective of the URBCON project is to reduce the consumption of primary raw materials and CO₂ emissions resulting from the construction and maintenance of buildings and infrastructure in urban areas. The project focuses on concrete as a building material.

Learn more

Current

Knowledge transfer in the building trade

The overriding aim is to actively promote innovative developments on future-oriented markets in Germany. The building industry is one of these.

Learn more

Chemistry and mineralogy


Completed

High-performance clinker for blastfurnace cements

Aim of the project was to improve the early strength performance of blastfurnace cements by a systematic adjustment of the clinker phase composition and/or addition of mineralisers in the clinker production process.

Learn more

Completed

Performance of ternary cements with Portland cement clinker, granulated blast furnace slag and calcined clay as the main constituents

The aim of the research project is the detailed investigation of the performance, durability and hydration behaviour of ternary cements with blastfurnace slag and calcined clay as main constituents (KSQ cements).

Learn more

Completed

Optimisation of the X-ray analysis of dusts from clinker production as a basis for their utilisation and process control

The aim of the research project was to define the procedure for robust and precise dust analyses in factory laboratories in order to enable optimal utilisation of production dusts and to support process control.

Learn more

Completed

Suitability of various inorganic substances for use as a minor constituents in cements according to EN 197-1

The main scope of this research project was to supply evidence that selected inorganic substances are suitable for the use as minor constituents.

Learn more

Completed

Interactions between superplasticizers and cements with calcined clay in dependence of the temperature

The aim of the research project was to determine interactions between superplasticizers and cements with calcined clay.

Learn more

Completed

Investigations on the internal particle size distribution of main constituents of Portland composite and composite cements

A laboratory method and a method on the internal particle size distribution that can be used on-site in a cement plant were developed in this research project.

Learn more

Environmental protection


Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Narrow down your search here.

Areas

  • Publications
  • Research projects
  • Training
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading