Tagungsband, 26. - 28. September 2018

Proceedings, 26. - 28. September 2018

Tagungsband, 25.-27. September 2013

This research project serves to analyse the effects of various factors (especially chemistry and mineralogy of the raw clay, calcination temperature) on the effective alkali content of cements with calcined clays,

In this research project, IR spectroscopy in combination with mathematical tools (chemometrics) is going to be evaluated as an analytical method for the characterisation of silica based materials, primarily X-ray amorphous materials, with regard to the reliable determination of the composition of material mixtures with X-ray amorphous materials (e.g. ternary cements with calcined clay and/or recycled concrete fines). In a next step, the findings on the analytical method and evaluation routines developed for cement are going to be evaluated with regard to their transferability to siliceous aggregates for estimating its alkali sensitivity.

Following the recommendations of the CO₂ roadmap, a minimum of 50 % of concrete for pavers will be produced with CEM II/C or similar clinker efficient cements by 2050. Proof of their practicability for production of two-layer pavers is still pending. This research project aims to develop actions for paver manufacturers to ensure a production of concrete pavers with a high resistance to freeze-thaw attack with de-icing chemicals using clinker efficient cements.

In this training you will become familiar with all relevant aspects concerning the use of alternative fuels in cement plants. Starting with the main political drivers such as the circular economy and the European waste fuel strategy, you will get a detailed insight into the current state-of-the-art-situation with regard to the use of alternative fuels in the EU. In this context, pre-treatment and suitable quality control of alternative fuels will be also explained and presented to you. You will focus on all the relevant aspects of the use of alternative fuels in the burning process (e.g. drivers and barriers of their use, available process technology and latest developments) and discuss them in the sessions. You will acquire knowledge about technical feasibility and optimisation potential, and have the possibility to discuss case studies.

Clinker production is the most energy-intensive process step in cement manufacturing. It can represent up to 90% of the total energy demand in a cement plant and is therefore a main focus not only with regard to cost optimisation and quality improvement of the final product, but also regarding emission control and the reduction of impacts on the environment. VDZ’s training will enable you as participant to obtain a deeper knowledge of the clinker production process and a better understanding of how the daily decisions can impact the overall performance of the plant (quality, electrical energy use, fuel consumption and emissions).

This seminar will give you a practical overview of the fundamentals of cement chemistry and the main product properties. You will learn about the origin, composition and properties of the raw materials used in the production of Portland cement clinker and cement, and understand the chemical reactions that take place during the clinker burning process. We will show you how clinker is characterised and what factors influence its properties. The hydration reactions of Portland cements and cements with other main constituents will also be covered. You will learn methods for cement characterisation and production control during the seminar.

The 9ᵗʰ International VDZ Congress took place in Düsseldorf on 6 – 8 November 2024. The VDZ Congress is the international scientific forum for the cement industry and its suppliers. Delegates from all over the world discuss the latest developments concerning the transformation of the industry on its way towards climate neutrality.