Publications

Tonindustrie-Zeitung 62 (1938) 66, S.716-718

Deutsche Baumeister (1940) 12, 3 S.

Wiederaufbau-Mitteilungen (1947) 6, S.13

Vorträge auf der ordentlichen Mitgliederversammlung am 27. und 28. Spril 1954 in Düsseldorf (Mitgliederversammlung des Vereins Deutscher Zementwerke: Vorträge Düsseldorf 27.-28.04.1954) / Verein Deutscher Zementwerke, VDZ (Hrsg.). - Düsseldorf : Verein Deutscher Zementwerke, VDZ, 1954. - (Tagungsberichte der Zementindustrie 10), S.57-71

The capture of CO₂ and its subsequent use and storage are essential elements of the cement industry's decarbonisation strategy. The capture of CO₂ from the flue gas is energy-intensive and complex. It can be carried out more easily and efficiently by maximising the CO₂ concentration in the flue gas. The separation of the calcination of the limestone in the raw meal from the burning process to produce clinker phases simplifies the accumulation of CO₂ in the flue gas significantly.

International Cement Review, 5 (2023), pp. 60-61

ZKG Cement, Lime, Gypsum 2022, 75(8), S.46-51

The capture of CO₂ and its subsequent use and storage are essential elements of the cement industry's decarbonisation strategy. The capture of CO₂ from the flue gas is energy-intensive and complex. It can be carried out more easily and efficiently by maximising the CO₂ concentration in the flue gas. The separation of the calcination of the limestone in the raw meal from the burning process to produce clinker phases simplifies the accumulation of CO₂ in the flue gas significantly.

Executive Summary of the VDZ Study

VDZ's Education and Training Programme 2023/24 ranges from the teaching of technical basics to the imparting of special technical knowledge and education courses for managers. VDZ offers individual, tailor-made seminars on the topics of clinker and cement production, maintenance, quality assurance, environmental protection and concrete technology. Almost all seminars can also be designed and implemented as inhouse seminars according to individual customer requirements. In this new brochure you will also find two new seminar topics reflecting current developments in the cement and concrete industry.

In keeping with our time-honoured tradition, this year's edition of the "Environmental data of the German cement industry" again provides an in-depth insight into the use of raw materials, energy input and the various emissions produced by German cement manufacturers. This encompasses not only the dust and dust bound constituents, but also the inorganic and organic exhaust gas compounds. A further aspect of our environmental data is information on carbon dioxide emissions, the reduction of which is a particular focal point in connection with the decarbonisation of cement production.

We see diversity as an enrichment of our work and an opportunity for our company. Therefore, we strive for equal participation of all genders and cultures in our workforce.

Ab sofort stellt der BTB sein innovatives Qualifizierungstool online. Damit wird Mitarbeitenden der Betonindustrie aus fachfremden Berufen oder auch ohne Ausbildung der berufsbegleitende Weg zum qualifizierten Berufsabschluss „Verfahrensmechaniker in der Steine- und Erdenindustrie (m/w/d)“ eröffnet.

Ziel des IGF-Vorhabens 19276 N war es, grundlegende Erkenntnisse zur bedarfsgerechten Verdichtung von leicht zu verarbeitenden Betonen in Abhängigkeit der Frischbetoneigenschaften zu gewinnen. Die Untersuchungen sollten dabei den gesamten möglichen Bereich der Frischbetoneigenschaften von LVB abdecken.

Das IGF-Vorhaben 19077 BG sollte Erkenntnisse über das Verhalten verschiedener Gesteine unter beschleunigenden Bedingungen in AKR-Prüfungen liefern. Die Ergebnisse sollten dazu dienen, die Wirkung von verschiedenen Temperaturen, Lagerungslösungen und Lösungskonzentrationen in Prüfungen mit unterschiedlichen groben Gesteinskörnungen besser einschätzen zu können.

In a CORNET (Collective Research Networking) research project, the project partners CRIC (Belgium), Smart minerals (Austria) and VDZ (Germany) had combined under the consortium leadership of the VDZ to determine characteristic variables for cement and mortar samples and correlate them with the results of concrete durability tests.

The aim of the C³ CarbonSpeed project was to create a guideline to complement the existing verification procedures of the building authorities (approval in individual cases, national technical approval) with a view to shortening the time required for the introduction of solutions with carbon concrete.

The aim of the current research phase was the elimination of market barriers through clear regulation.

Tonindustrie-Zeitung 36 (1912) 53, S.752-753

Zement (1921) 29, S.361-364

Zement 12 (1923) 46, S.297

Beton und Eisen 12 (1923) 23, S.287-288

Zement 12 (1923) 1, S.3-5

Tonindustrie-Zeitung 48 (1924) 94, S.1104

Proceedings, 25.-27. September 2013

VDZ's Education and Training Programme 2023/24 ranges from the teaching of technical basics to the imparting of special technical knowledge and education courses for managers. VDZ offers individual, tailor-made seminars on the topics of clinker and cement production, maintenance, quality assurance, environmental protection and concrete technology. Almost all seminars can also be designed and implemented as inhouse seminars according to individual customer requirements. In this new brochure you will also find two new seminar topics reflecting current developments in the cement and concrete industry.

Proceedings, 26. - 28. September 2018

Tagungsband, 26. - 28. September 2018

Tagungsband, 25.-27. September 2013

Betonbau in Europa (Darmstäder Massivbau-Seminar; Bd.15), S.IV,1-IV,11

The capture of CO₂ and its subsequent use and storage are essential elements of the cement industry's decarbonisation strategy. The capture of CO₂ from the flue gas is energy-intensive and complex. It can be carried out more easily and efficiently by maximising the CO₂ concentration in the flue gas. The separation of the calcination of the limestone in the raw meal from the burning process to produce clinker phases simplifies the accumulation of CO₂ in the flue gas significantly.

VDZ's Education and Training Programme 2023/24 ranges from the teaching of technical basics to the imparting of special technical knowledge and education courses for managers. VDZ offers individual, tailor-made seminars on the topics of clinker and cement production, maintenance, quality assurance, environmental protection and concrete technology. Almost all seminars can also be designed and implemented as inhouse seminars according to individual customer requirements. In this new brochure you will also find two new seminar topics reflecting current developments in the cement and concrete industry.

In keeping with our time-honoured tradition, this year's edition of the "Environmental data of the German cement industry" again provides an in-depth insight into the use of raw materials, energy input and the various emissions produced by German cement manufacturers. This encompasses not only the dust and dust bound constituents, but also the inorganic and organic exhaust gas compounds. A further aspect of our environmental data is information on carbon dioxide emissions, the reduction of which is a particular focal point in connection with the decarbonisation of cement production.

Forschungsbericht zum IGF-Projekt 20514N, in dem die technisch-wissenschaftlichen Grundlagen einer Minderung der Quecksilberfrachten im Abgasweg von Zementdrehrohrofenanlagen durch eine sorbensunterstützte Staubausschleusung sowie Möglichkeiten der Optimierung untersucht werden sollten.

The "Environmental data of the German cement industry 2020" prove that cement manufacturers are facing up to the environmental challenges of our time and informing the public about them in a transparent way. The focus is on the topics of climate neutrality by 2050, saving primary raw materials, and air pollution control.

VDZ's environmental data reflect that the German cement industry invests decisively in plant optimisation. This keeps them in a leading role worldwide in terms of environmental compatibility, alternative fuels and plant energy efficiency.