Loading
filterfilterClose entries
filterfilterFilter entries

Knowledge transfer


Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Learn more

Completed

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Learn more

Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Learn more

Cement production


Current

Investigation and optimisation of the dynamic operating characteristics of the oxyfuel-operated cement clinker burning process for CO₂ capture

The oxyfuel technology is to be investigated qualitatively using a dynamic process simulation. This will provide a basis for the control and optimization of oxyfuel systems, resulting in a faster rollout of this crucial technology for CO₂ reduction.

Learn more

Current

Process engineering investigation of the energetic-material utilisation of wastes containing carbon fibres in cement plants - EVCAZ

In the AiF project EVCAZ, the energetic and material utilisation of wastes containing carbon fibres is to be demonstrated on an industrial scale in a cement plant. The central tasks are the evaluation of the conversion success of the CF fibres, the recording of the resulting emissions and the consideration of influences on the process and the clinker quality. The findings obtained are summarised to assess health and environmental risks and to answer questions relevant to approval as a decision-making aid for cement plant operators.

Learn more

Current

Automised Classification and Assessment of Alternative Fuels

The aim of the project is to investigate Machine Learning models for the characterisation of alternative fuels in the cement production. For this purpose, a public-accessible database (with fuel characteristics and images) is set-up and different machine learning models will be trained on that data, the algorithms will be tested on their robustness and suggestions for the classification of the fuel quality and its visualisation in the control room will be made.

Learn more

Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Current

Development of a method to improve clinker cooling and to increase energy efficiency in cement rotary kilns by using infrared cameras

In the research project, infrared cameras are used to record the surface temperature of the clinker bed in the clinker cooler. Together with calculated enthalpy flows, this allows control room personnel to identify the operating condition of the cooler. This is used in operational tests to optimise the heat transfer in the clinker cooler by controlling the drive system and adjusting the cooling air distribution.

Learn more

Current

Optimisation of clinker-efficient cements by means of multimodal particle size distributions using energy-efficient products from separate ultra-fine grinding

Separate ultra-fine grinding of cement - Energy-efficient grinding meets optimised cement and concrete properties. Today, future-oriented cements can already be produced more sustainably and efficiently by using various components of different finenesses.

Learn more

Concrete technology


Current

Durability of concretes with clinker efficient cements under modified concrete technological conditions

The current research project aims to determine if CEM II/C-cements can be used in some exposure classes (XC1-4, XF1) according to DIN 1045 2 under modified technological conditions of the concrete (reduced water-cement ratio, increased minimum strength class) without additional requirements.

Learn more

Current

Proof for durability of chemically stressed concretes and concrete components: Proof of concrete attacked by carbonic acid

In order to be able to use new, clinker-efficient cements and concretes in the future even under the attack of carbonic acid, the development of a test and assessment concept is necessary. Therefore, VDZ and the Institute for Building Research of the RWTH Aachen started a joint research project.

Learn more

Current

Testing the freeze-thaw resistance with de-icing agents of concrete for exposure class XF2

The aim of the research project is to develop a practical method for testing the freeze-thaw resistance of XF2 concretes.

Learn more

Current

Environmentally friendly railway sleepers with calcium sulfoaluminate cements

The research project will investigate whether the technical requirements for railway sleepers with CSA cements can be realised. Also, some basic links to standards (e.g. modulus of elasticity, creep and shrinkage in accordance with EC2) must be checked and ensured.

Learn more

Current

URBCON

The objective of the URBCON project is to reduce the consumption of primary raw materials and CO₂ emissions resulting from the construction and maintenance of buildings and infrastructure in urban areas. The project focuses on concrete as a building material.

Learn more

Current

Knowledge transfer in the building trade

The overriding aim is to actively promote innovative developments on future-oriented markets in Germany. The building industry is one of these.

Learn more

Chemistry and mineralogy


Completed

Analysis concept for the determination of trace elements in the eluate of cement-bound building materials (IGF No. 16989 N)

The aim of the AiF research project was to identify the causes of the sometimes greater scatter rates in the analysis results in the case of comparison trials for the long-term tank test.

Learn more

Completed

Interactions between siliceous fly ash or calcined clay as cement main constituent and superplasticizers based on polycarboxylate ether as well as their influences on rheological properties of fresh cement paste and fresh concrete

It was determined how the rheological properties and the consistency of fresh concrete can be improved by the adjustment of the type and proportion of fly ash or calcined clay in the cement to the clinker as well as the type and dosage of the superplasticizer.

Learn more

Completed

Suitability of various inorganic substances for use as a minor constituents in cements according to EN 197-1

The main scope of this research project was to supply evidence that selected inorganic substances are suitable for the use as minor constituents.

Learn more

Completed

Interactions between superplasticizers and cements with calcined clay in dependence of the temperature

The aim of the research project was to determine interactions between superplasticizers and cements with calcined clay.

Learn more

Completed

Development of an analysis concept for the quantification of cement, its main constituents as well as additives in hardened concrete

As part of the project, methods were developed that allow the cement content, cement type and additive content in hardened concrete to be reliably determined.

Learn more

Completed

Interactions between cements with several main constituents and methyl cellulose and their performance in dry mortar

Interactions between different structured or modified methyl hydroxyethyl celluloses and cements blended with limestone, blastfurnace slag or fly ash were determined.

Learn more

Environmental protection


Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Narrow down your search here.

Areas

  • Publications
  • Research projects
  • Training
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading