Here you can view a wide range of information arranged by topic.
"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.
The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
The research project was investigating the extent to which the different types of mercury bond, the alkaline atmosphere and high dust loading influence the effectiveness of possible additives such as activated charcoal, open-hearth coke or other calcium compounds and mixtures of these.
The aim of the research project was to obtain general NOₓ emission abatement to 200 mg/m³ with a minimal NH₃ slip of max. 30 mg/m³ in cement industry rotary kiln plants with precalcination.
Taking into account the experimental results and a techno-economic analysis, CEMCAP has developed a decision basis for CO₂ capture technologies in the cement industry. This should enable European cement producers to perform plant-specific CCS economic analyses and adapt to a world with limited carbon emissions. From a European perspective, CEMCAP aims to expand the portfolio of cost- and resource-efficient options for CCS and thus the possibilities for reducing greenhouse gas emissions.
The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.
The aim of this research project was to investigate the issue of high-temperature corrosion in the hot area of the preheater and the rotary kiln.
The aim of the research project was to identify those fuel particles which potentially cause the greatest disturbances and to determine their rate of conversion in the flame and in the clinker bed. A further goal was to derive quality criteria for AF, to elaborate recommendations for the optimisation of fuel feeding systems and to develop a tool to estimate the suitability of an AF.
The purpose of the research project is to gain the first systematic scientific findings on spalling behaviour in the event of fire and on thermo-mechanical and thermo-physical properties for concretes with the new clinker-efficient cement types and with recycled aggregates.
Redol deals with closing material cycles using the city of Zaragoza as an example. The research project focuses on solid urban waste, which is an abundant source to produce circular products. Five value chains for solid urban waste in the Aragon region will be redesigned in order to be able to produce circular products using an industrial-urban symbiosis approach.
EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a widespread application, it is important that all parties involved develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for application of these cements in concrete for the construction industry.
EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a wide application, all parties involved have to develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for the application of these cements in the construction industry.
In this project, the systematic classification of the carbonation and chloride penetration resistance of concretes will be investigated. Based on these results, recommendations for action will be derived for production and conformity control within the framework of a performance-based durability concept.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
The aim of the AiF research project was to identify the causes of the sometimes greater scatter rates in the analysis results in the case of comparison trials for the long-term tank test.
It was determined how the rheological properties and the consistency of fresh concrete can be improved by the adjustment of the type and proportion of fly ash or calcined clay in the cement to the clinker as well as the type and dosage of the superplasticizer.
The main scope of this research project was to supply evidence that selected inorganic substances are suitable for the use as minor constituents.
The aim of the research project was to determine interactions between superplasticizers and cements with calcined clay.
As part of the project, methods were developed that allow the cement content, cement type and additive content in hardened concrete to be reliably determined.
Interactions between different structured or modified methyl hydroxyethyl celluloses and cements blended with limestone, blastfurnace slag or fly ash were determined.
In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.
