Loading
filterfilterClose entries
filterfilterFilter entries

Knowledge transfer


Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Learn more

Completed

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Learn more

Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Learn more

Cement production


Completed

Development of a high-efficiency SNCR process with staged combustion for reducing NOₓ and NH₃ emissions in cement industry rotary kiln plants with precalcination

The aim of the research project was to obtain general NOₓ emission abatement to 200 mg/m³ with a minimal NH₃ slip of max. 30 mg/m³ in cement industry rotary kiln plants with precalcination.

Learn more

Completed

Improving the selection and service life of metallic materials in the high-temperature range of rotary cement kilns, taking into account the relevant gas atmosphere

The aim of this research project was to investigate the issue of high-temperature corrosion in the hot area of the preheater and the rotary kiln.

Learn more

Completed

Investigation and optimisation of catalytic methods of reducing carbon monoxide and organic components in the exhaust gas of rotary kiln plants in the cement industry

As part of the IGF research project 17364 N funded by the AiF, studies were performed in conjunction with the research institute of the cement industry (FIZ) and the Institute of Chemical and Electrochemical Process Engineering at Clausthal University (ICVT) on the catalytic reduction of CO and organic components in the rotary kiln exhaust gas of cement plants.

Learn more

Completed

Stabilisation of processes with high secondary fuel use through the injection of oxygen in rotary kiln plants in the cement industry

The main aim of the research project was to evaluate the influence of oxygen enrichment on the clinker, on kiln operation and on the use of alternative fuels as well as on the composition of the exhaust gas.

Learn more

Completed

Sustainable education for cement industry workers in Russia (BIRUZEM)

At the request of VDZ members with business interests in Russian-speaking regions, VDZ therefore got together with other service providers and universities in early 2013 to work on creating a platform for training courses in Russian in the field of cement production and utilisation.

Learn more

Completed

Reducing mercury loads in rotary cement kilns using sorbents

The research project was investigating the extent to which the different types of mercury bond, the alkaline atmosphere and high dust loading influence the effectiveness of possible additives such as activated charcoal, open-hearth coke or other calcium compounds and mixtures of these.

Learn more

Concrete technology


Completed

Testing and assessment of effective alkali content in cements

The IGF project 19295 N intended to devise a testing and assessment system that better reflects the cements’ material properties.

Learn more

Completed

Optimal compaction of concretes with high workability and high robustness

The aim of this research project was to create basic knowledge on the results of different processing and compaction measures in correlation with the properties of the fresh concrete.

Learn more

Completed

Behaviour of different aggregates under accelerating conditions in ASR testing methods

The research project should generate essential knowledge on the behaviour of different aggregates under accelerated conditions within ASR testing methods. The target was to obtain with different testing methods a consistent assessment of the alkali sensitivity of aggregates and concretes respectively and to clearly identify expansive reactions that are not caused by ASR.

Learn more

Completed

DURAFOR - Forecast of durability properties of concrete with new clinker based cements

In a CORNET (Collective Research Networking) research project, the project partners CRIC (Belgium), Smart minerals (Austria) and VDZ (Germany) had combined under the consortium leadership of the VDZ to determine characteristic variables for cement and mortar samples and correlate them with the results of concrete durability tests.

Learn more

Completed

CARBON CONCRETE COMPOSITE – C³-Environment: Characterisation and leaching tests for the determination of the environmental safety of C³

Goal of the research project was to generate a broad, scientific verified data base via corresponding leaching and shower tests (laboratory and outdoor tests) on carbon-concrete test specimen with different concrete covering of the carbon-fibres as well as with different percentages of the carbon-fibres to evaluate the environmental compatibility of the new, innovative composite building material “carbon-concrete”.

Learn more

Completed

CARBON CONCRETE COMPOSITE – C³: Acceleration of standardisation and approval procedures in the context of test-based design and performance testing for C³ products (CarbonSpeed)

The aim of the C³ CarbonSpeed project was to create a guideline to complement the existing verification procedures of the building authorities (approval in individual cases, national technical approval) with a view to shortening the time required for the introduction of solutions with carbon concrete.

Learn more

Chemistry and mineralogy


Current

Performance of ternary cements with Portland cement clinker, calcined clay and limestone as the main constituents

The project systematically investigates the performance and hydration behaviour of ternary cement (KQL) with clinker (K), calcined clay (Q) and limestone (L) as well as key durability aspects of concretes produced with these materials.

Learn more

Current

Systematic application of IR spectroscopy to strengthen the circular economy in the construction industry

In this research project, IR spectroscopy in combination with mathematical tools (chemometrics) is going to be evaluated as an analytical method for the characterisation of silica based materials, primarily X-ray amorphous materials, with regard to the reliable determination of the composition of material mixtures with X-ray amorphous materials (e.g. ternary cements with calcined clay and/or recycled concrete fines). In a next step, the findings on the analytical method and evaluation routines developed for cement are going to be evaluated with regard to their transferability to siliceous aggregates for estimating its alkali sensitivity.

Learn more

Current

Process atmosphere during clay calcination – effects on emissions and product properties

Calcined clays as the main cement constituent are an essential part of the cement industry's decarbonisation strategy. Many clay deposits have iron-rich impurities that form hematite during calcination, which colors the product, the cement and ultimately the concrete red. A reducing atmosphere during calcination and/or cooling can prevent the formation of hematite. Systematic findings on the influence of secondary constituents in clays on their reactivity, emissions and cement-technical properties have hardly been available to date and are to be systematically investigated in the project.

Learn more

Current

High-quality recycling of crushed concrete sand

In the ZIM research project, used concrete is processed in such a way as to improve the usability of all fractions generated, in particular the crushed sand and the fine fraction. To this end, tests are also being carried out on the pozzolanic reactivation of the recycled concrete fines.

Learn more

Current

X-ray analysis for production control of cements with calcined clays

The subject of the IGF research project 22502 N is the application of X-ray diffraction analysis for production and quality control of calcined clays and cements produced with them, in order to accelerate the development of cements with further reduced clinker content within the framework of the decarbonisation of the cement industry.

Learn more

Current

Elution of fresh concrete – determination concept

The IGF research project 22330 N is concerned with the environmental compatibility of cement-bound building materials in special application situations in which the binder comes into contact with groundwater during the processing phase. A procedure is being developed to demonstrate the environmental compatibility of the building materials in these situations as well.

Learn more

Environmental protection


Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Narrow down your search here.

Areas

  • Publications
  • Research projects
  • Training
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading