Loading
filterfilterClose entries
filterfilterFilter entries

Knowledge transfer


Completed

BetonQuali - information and qualification platform

"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.

Learn more

Completed

Increasing energy efficiency in the cement industry through training by means of virtual reality (VR)

The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.

Learn more

Current

Reduction of green house gases by process innovations in the primary Industry, SP 6: Development of a methodology for cross-project and ecological potential assessment, cement industry

The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.

Learn more

Cement production


Completed

Development of a high-efficiency SNCR process with staged combustion for reducing NOₓ and NH₃ emissions in cement industry rotary kiln plants with precalcination

The aim of the research project was to obtain general NOₓ emission abatement to 200 mg/m³ with a minimal NH₃ slip of max. 30 mg/m³ in cement industry rotary kiln plants with precalcination.

Learn more

Completed

Improving the selection and service life of metallic materials in the high-temperature range of rotary cement kilns, taking into account the relevant gas atmosphere

The aim of this research project was to investigate the issue of high-temperature corrosion in the hot area of the preheater and the rotary kiln.

Learn more

Completed

Investigation and optimisation of catalytic methods of reducing carbon monoxide and organic components in the exhaust gas of rotary kiln plants in the cement industry

As part of the IGF research project 17364 N funded by the AiF, studies were performed in conjunction with the research institute of the cement industry (FIZ) and the Institute of Chemical and Electrochemical Process Engineering at Clausthal University (ICVT) on the catalytic reduction of CO and organic components in the rotary kiln exhaust gas of cement plants.

Learn more

Completed

Stabilisation of processes with high secondary fuel use through the injection of oxygen in rotary kiln plants in the cement industry

The main aim of the research project was to evaluate the influence of oxygen enrichment on the clinker, on kiln operation and on the use of alternative fuels as well as on the composition of the exhaust gas.

Learn more

Completed

Sustainable education for cement industry workers in Russia (BIRUZEM)

At the request of VDZ members with business interests in Russian-speaking regions, VDZ therefore got together with other service providers and universities in early 2013 to work on creating a platform for training courses in Russian in the field of cement production and utilisation.

Learn more

Completed

Reducing mercury loads in rotary cement kilns using sorbents

The research project was investigating the extent to which the different types of mercury bond, the alkaline atmosphere and high dust loading influence the effectiveness of possible additives such as activated charcoal, open-hearth coke or other calcium compounds and mixtures of these.

Learn more

Concrete technology


Completed

New functionalities of textile-reinforced concrete through titanium dioxide modifications Subsidiary project: fine-grained concrete and cement-bound adhesive

The working plan of the Research Institute of the Cement Industry was aimed at systematic investigation of the mix formulation and workability of a nano-based cement-bound adhesive.

Learn more

Completed

ASR performance testing: extending the database to include the 60 °C concrete test with particular reference to cements with several main constituents

In the IGF (Cooperative Industrial Research) project the framework conditions for a possible performance test method for evaluating the alkali reactivity of concrete was calibrated on the basis of the requirements of the German regulations.

Learn more

Completed

Reducing the environmental impact of concrete construction through new types of cement and the concrete produced from them using starting materials that are available in adequate quantities

The aim of this research project was the laboratory and industrial production and testing of cements that contain levels of limestone above the maximum content described in DIN EN 197-1.

Learn more

Completed

Procedures for E II aggregates

VDZ and the Brandenburg Technical University Cottbus-Senftenberg (BTU) investigated whether it is possible to define an alkali sensitivity class E II-S on the basis of the 40 °C concrete test with cloud chamber storage. In addition, criteria for the rapid test procedure and the 60 °C concrete test as well as the BTU-SP rapid test were also derived.

Learn more

Completed

Determination of characteristic values based on the degree of hydration for predicting the durability of concrete

Mortar and concrete trials were used to determine characteristic parameters, such as the void filling of the cements, their hydration characteristics, the porosity of the mortars and concretes made with these cements, and the durability of the concretes.

Learn more

Completed

Boundary conditions for accurately achieving projected concrete properties in the modern 5-material system of diverse concrete constituents

Within the framework of the research project, the intention was to identify the most important influence parameters that are responsible for showing unscheduled properties such as changed consistency, signs of sedimentation, or an accelerated or decelerated strength development in certain cases of fresh concretes which are produced over prolonged periods.

Learn more

Chemistry and mineralogy


Current

Effects of pre-hydration on the performance of cements and the influence of different clinker properties

The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.

Learn more

Current

Performance of ternary cements with Portland cement clinker, granulated blast furnace slag and calcined clay as the main constituents

The aim of the research project is the detailed investigation of the performance, durability and hydration behaviour of ternary cements with blastfurnace slag and calcined clay as main constituents (KSQ cements).

Learn more

Current

Interactions of accelerating admixtures and clinker-efficient cements with several main constituents to improve the early compressive strength of concrete

The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason for this is that early strength is not high enough for economical production processes and also competitive construction with concrete. Accelerating admixtures can improve the early strength of concrete. The research project investigates interactions between concrete admixtures that accelerate the strength development and cements with several main constituents.

Learn more

Current

Calcined Clays from mineral secondary raw materials

The aim of the research project is to investigate the suitability of previously largely unused mineral secondary raw materials from the stone and earth industry as a resource-conserving and climate-friendly main cement constituent. The use of cal-cined clays from secondary raw materials instead of conventional main cement constituents or high-quality primary clays can make an important contribution to the production of climate-friendly and resource-efficient cements.

Learn more

Current

Influences of two-stage mixing on the hydration behaviour of Portland-composite cements and composite cements as well as on the concrete performance

The research project was investigating the extent to which more intensive mixing and further cement constituents besides clinker increase the mixing energy input and can increase the early cement hydration and thus the strength development of clinker-efficient cements.

Learn more

Current

Effects of pre-hydration on the performance of cements and the influence of different clinker properties

The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.

Learn more

Environmental protection


Current

CaLby2030 – Calcium Looping to capture CO2 from industrial processes by 2030

In CaLby2030, the deployment of Calcium Looping technology (CaL) using Circulating Fluidised Bed reactors (CFB) in the cement industry will be investigated, aiming at efficient CO₂-Capture without compromising clinker production or product quality. A technology scale-up will be also evaluated in a German cement plant by exploring different retrofit possibilities. Besides the cement sector, the deployment of CFB-CaL technology in other relevant sectors will also be investigated.

Learn more

Narrow down your search here.

Areas

  • Publications
  • Research projects
  • Training
  • Events

Subjects

  • All
  • Knowledge transfer
  • Cement production
  • Cement industry
  • Concrete technology
  • Chemistry and mineralogy
  • Quality assurance
  • Environmental protection

Languages

  • All
  • English

Thank you for your interest in our publication:

Loading