Here you can view a wide range of information arranged by topic.
The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.
The research project was investigating the extent to which the different types of mercury bond, the alkaline atmosphere and high dust loading influence the effectiveness of possible additives such as activated charcoal, open-hearth coke or other calcium compounds and mixtures of these.
The aim of the research project was to obtain general NOₓ emission abatement to 200 mg/m³ with a minimal NH₃ slip of max. 30 mg/m³ in cement industry rotary kiln plants with precalcination.
Taking into account the experimental results and a techno-economic analysis, CEMCAP has developed a decision basis for CO₂ capture technologies in the cement industry. This should enable European cement producers to perform plant-specific CCS economic analyses and adapt to a world with limited carbon emissions. From a European perspective, CEMCAP aims to expand the portfolio of cost- and resource-efficient options for CCS and thus the possibilities for reducing greenhouse gas emissions.
In the course of the research project, a cross-industry approach to the determination of flexibility potential was developed and adapted to the needs of the basic materials industry.
The aim of this research project was to investigate the issue of high-temperature corrosion in the hot area of the preheater and the rotary kiln.
The aim of the research project was to identify those fuel particles which potentially cause the greatest disturbances and to determine their rate of conversion in the flame and in the clinker bed. A further goal was to derive quality criteria for AF, to elaborate recommendations for the optimisation of fuel feeding systems and to develop a tool to estimate the suitability of an AF.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
The IGF project 21386 N focuses on the relationship between the releasable alkali contents from aggregates and possible effects in concrete.
The topic of the research project is the utilisation of brick-containing materials from the recycling of mineral construction waste. It is being investigated whether and how resource-efficient cements can be produced with processed brick-containing construction waste and reduced clinker content, thus reducing process-related CO₂ emissions.
In this project, the systematic classification of the carbonation and chloride penetration resistance of concretes will be investigated. Based on these results, recommendations for action will be derived for production and conformity control within the framework of a performance-based durability concept.
In order to be able to use new, clinker-efficient cements and concretes in the future even under the attack of carbonic acid, the development of a test and assessment concept is necessary. Therefore, VDZ and the Institute for Building Research of the RWTH Aachen started a joint research project.
EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a widespread application, it is important that all parties involved develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for application of these cements in concrete for the construction industry.
The research project has two objectives. The first is to investigate whether certain chemical / mineralogical properties can make clinker more robust against pre-hydration effects. Secondly, it will be investigated which measures can be taken to counteract possible negative effects, in particular by adjusting the sulphate carrier composition.
The aim of the research project is the detailed investigation of the performance, durability and hydration behaviour of ternary cements with blastfurnace slag and calcined clay as main constituents (KSQ cements).
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason for this is that early strength is not high enough for economical production processes and also competitive construction with concrete. Accelerating admixtures can improve the early strength of concrete. The research project investigates interactions between concrete admixtures that accelerate the strength development and cements with several main constituents.
The aim of the research project is to investigate the suitability of previously largely unused mineral secondary raw materials from the stone and earth industry as a resource-conserving and climate-friendly main cement constituent. The use of cal-cined clays from secondary raw materials instead of conventional main cement constituents or high-quality primary clays can make an important contribution to the production of climate-friendly and resource-efficient cements.
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason is that the early strength is not high enough for economical production processes and competitive construction with concrete. The research project is investigating the extent to which more intensive mixing and further cement constituents besides clinker increase the mixing energy input and can increase the early cement hydration and thus the strength development.
The replacement of primary fuels by alternative fuels is of great economic and ecological importance for the cement industry and is to be increased in the future. The fuel ashes are used as raw material in the cement clinker and influence its properties as well as the coating formation on the refractory lining in the kiln. Exact knowledge of these effects is indispensable for the further increase of the alternative fuel rate and the simultaneous optimisation of the kiln operation as well as for the maintenance of the clinker quality and the service life of the refractory lining.
