Here you can view a wide range of information arranged by topic.
The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
"BetonQuali - information and qualification platform", a joint project of VDZ gGmbH and its project partners, aimed to develop and test a training method for semi-skilled and unskilled employees in the concrete industry.
The consortia of AC²OCem and ANICA projects held a public workshop on carbon capture technologies which was organised by VDZ on 7 - 8 March 2023.
The aim of the CLEANKER (CLEAN clinKER) project is to perform large-scale testing of this technology as an integrated method (Technology Readiness Level 7). It is planned to treat 4 000 m³/h exhaust gas in a demonstration plant to be connected to an existing kiln line at the Buzzi Unicem works in Vernasca in Italy.
Separate ultra-fine grinding of cement - Energy-efficient grinding meets optimised cement and concrete properties. Today, future-oriented cements can already be produced more sustainably and efficiently by using various components of different finenesses.
In the research project, infrared cameras are used to record the surface temperature of the clinker bed in the clinker cooler. Together with calculated enthalpy flows, this allows control room personnel to identify the operating condition of the cooler. This is used in operational tests to optimise the heat transfer in the clinker cooler by controlling the drive system and adjusting the cooling air distribution.
The aim of IGF project 21619 is to develop a training simulator with which learners can independently solve typical process engineering tasks within a virtual reality (VR) environment, particularly in connection with ball mills.
ACCSESS takes a cross-sectorial approach to CO₂ Capture, Transportation, Utilisation and Storage (CCUS), working with Pulp and Paper, Cement, Waste to Energy, and Biorefining, all industries with big potential for carbon dioxide removal.
The transfer and networking project ReInvent aims to provide technical and organisational support for the BMBF funding measure KlimPro-Industrie.
The IGF project 21386 N focuses on the relationship between the releasable alkali contents from aggregates and possible effects in concrete.
The topic of the research project is the utilisation of brick-containing materials from the recycling of mineral construction waste. It is being investigated whether and how resource-efficient cements can be produced with processed brick-containing construction waste and reduced clinker content, thus reducing process-related CO₂ emissions.
In this project, the systematic classification of the carbonation and chloride penetration resistance of concretes will be investigated. Based on these results, recommendations for action will be derived for production and conformity control within the framework of a performance-based durability concept.
In order to be able to use new, clinker-efficient cements and concretes in the future even under the attack of carbonic acid, the development of a test and assessment concept is necessary. Therefore, VDZ and the Institute for Building Research of the RWTH Aachen started a joint research project.
EN 197-5 defined the clinker-efficient cements CEM II/C and CEM VI. Technical approvals for the application of CEM II/C cements have been issued. For a widespread application, it is important that all parties involved develop confidence in the new products. With new findings on fresh concrete properties, hardening behaviour and durability two research projects of the VDZ Concrete Technology Department will provide an important basis for application of these cements in concrete for the construction industry.
The replacement of primary fuels by alternative fuels is of great economic and ecological importance for the cement industry and is to be increased in the future. The fuel ashes are used as raw material in the cement clinker and influence its properties as well as the coating formation on the refractory lining in the kiln. Exact knowledge of these effects is indispensable for the further increase of the alternative fuel rate and the simultaneous optimisation of the kiln operation as well as for the maintenance of the clinker quality and the service life of the refractory lining.
The aim of the research project is to investigate the suitability of previously largely unused mineral secondary raw materials from the stone and earth industry as a resource-conserving and climate-friendly main cement constituent. The use of cal-cined clays from secondary raw materials instead of conventional main cement constituents or high-quality primary clays can make an important contribution to the production of climate-friendly and resource-efficient cements.
The aim of the research project is to develop a procedure for analysing trace elements on cements using X-ray fluorescence analysis. In addition, precision data and application limits are to be determined, which are essential in order to be able to classify the results.
The research project analysed whether sulphate-rich process dusts can be used to optimise the sulphate content of cements, thereby saving anhydrite/gypsum and, in particular, improving the early strength of cements with several main constituents. Furthermore, it was to be determined whether isothermal heat flow calorimetry can be used as a fast and cost-effective investigation method for this purpose.
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason for this is that early strength is not high enough for economical production processes and also competitive construction with concrete. Accelerating admixtures can improve the early strength of concrete. The research project investigates interactions between concrete admixtures that accelerate the strength development and cements with several main constituents.
The acceptance of resource-efficient cements with significantly reduced specific CO₂ emissions is still too low in construction practice. The main reason is that the early strength is not high enough for economical production processes and competitive construction with concrete. The research project is investigating the extent to which more intensive mixing and further cement constituents besides clinker increase the mixing energy input and can increase the early cement hydration and thus the strength development.
